P. 11
| Tecshow ION 740z
English version
Program
Play
1
DMX Receive
Slave Receive
Sequence
Music
Slave Receive 1,2,3
Master / Alone
Master / Alone
DMX Receive
Choose slave posi-
tion
Run Sequence
Music mode
Select Chase
2
Chase Part 1
Chase Part 2
Chase Part 3
Chase 1 ~ 8 Chase 1
Chase 1 ~ 8 Chase 2
Chase 1 ~ 8 Chase 3
Select and run auto
program
Edit Chase
2
Chase 1
:
Chase 8
Chase Test
Step 01
Step 64
=SCxxx
=SCxxx
Test
Beginning scene
Ending scene
Edit Scenes
2
Edit Scene 001
~ Edit Scene 250
Pan,Tilt,……
--Fade Time--
--Secne Time--
DMX Input
=xxx
=xxx
=xxx
Input manual scene
Modify manually
fading time
Modify manually
scene time
Input scene from
exterior controller
Scenes Record
ScXX=>ScXX
Auto Input scenes
6. DMX CONNECTION AND DMX PROTOCOL
DMX addressing
• The device is controlled by universal DMX 512
protocol, DMX address is the start channel
used to receive instructions from the exter-
nal controller. For independent control, each
fixture must be assigned its unique address
control channels. For example, this device has
four channel modes: 22/51/19/21, if we set
the mode at standard 22 channels mode, and
there are several models need to be inde-
pendently controlled, we just simply address
first fixture at 1, and second fixture at 23, third
one at 45, etc.
• If the devices have the same address, they will
behave synchronically.
• DMX addressing is limited, don’t set the address
so high that without enough control channels
for the fixtures.
•
Display is flashing when no DMX signal is re
-
ceived.