TECshow HALO 100 SPOT, User Manual

Page: 5 / 22

P. 5
- Tecshow Halo 100 Spot
English version
Top Lamp Temp 001-110
Sound Regulator -006 -- +006
Invert Pan
OFF ON for starting and ending , the default is OFF.
ON
Invert Tilt
OFF ON for starting and ending , the default is OFF.
ON
Pan-Tilt Swap
OFF
ON Exchange Pan/Tilt channel (include Pan/Tilt Fine)
Pan-Tilt Encoder
ON Use encoder (optocoupler) to determine out of step and auto-
matically correct position
OFF Correct position without encoder (optocoupler)
RDM
ON Support RDM function
OFF
No DMX Signal
KEEP Continue running as it is
CLEAR All motors return to the position and stop running.
Display
ON
OFF
Lamp On@Startup
OFF
ON
Load Default Press the “OK” button to see the confirmation dialog, press “OK”
again. The key restores the default settings
Manual Control
This interface is used to control the current fixture
and automatically enters the master state (does not
receive the DMX signal and sends a DMX signal to
the slave).
Option Description
Pan 0-255 Orange indicates selected, Press “OK” key enter into Edit status,
then press “UP” “DOWN” to select, press “OK” save and Exit edit
status.
Pan Fine 0-255
Tilt 0-255
Tilt Fine 0-255
Pan-Tilt Speed 0-255
Dimmer 0-255
Shutter/Strobe 0-255