P. 3
| Tecshow Grey II 8
English version
2. INPUT CHANNEL SECTION
1. Balance Input
Electronically Balanced inputs acceptable a stand-
ard XLR male connector. +48V Phantom Power
available on each input Mic socket. And this switch
is on Rear Phantom Power.
2. Line Input
The unbalanced Mic input is provided for the use
of a unbalanced mic and is designed to accept a
unbalanced high impedance input signal (This use
for connection Deck, Turntable, Keyboard ect.).
3. Gain Control
Adjusts input sensitivity from -60dB to -20dB with
the -20dB pad switch in the out position, and -40dB
to 0dB when the -20 dB pad switch is pushed.
4. Low Cut
The LOW CUT switch, 75Hz at a rate of 18dB per
octave.
5/6/7.4-Band Fixed - Frequency EQ
The stereo channels (9-16) have a 4-bandfixed -
frequency equalization: LOW shelving at 80Hz, LOW
MlD peaking at 400Hz, HIMID peaking at 2.5kl-lz,
and Hl shelvingat 12kHz.Each of these filters pro
-
vides up to 15dB of boost or cut. As with the mono
channels the circuit is flat (no boost or cut)at the
center detent positions.
8. Aux Send
Use this control to set the level of signal from ex
-
ternal stereo source and the main signal control is
recontrolled by STEREO or MONO section.
9. EFF
Use this control when you want to get effect sound
by adjustment of input signal. When you dont use
external source, digital delay will be working which
installed inside.
1
2
3
4
5
6
7
8
9
10
11
