P. 11
| Tecshow Gobo Dervy UV
English version
10. DMX ADDRESS SETTING
11. PRODUCT SIZE
•
Each fixture must set a specific starting
address. When receiving signal, fixture will
receive channel control signals of this address
from the DMX controller.
•
For easy to use, the user can set the same
address for several fixtures, also can set up a
unique address for every device.
•
If you set the same address for all fixtures, all
the fixtures will receive from the same DMX
channels signal. All connecting fixtures are
jointly controlled, controller can’t separately
control a device.
•
If you set a different address for each fixture,
each fixture will receive unique signal and can
be controlled by DMX controller separately.
•
This fixture has 14 channels, you should set
the starting address of the first unit to 1, the
second unit to 9(1*8 + 1), the third unit to
17(2*8+ 1), and so on.
191
,4
209
150
24
5,
2
230
165
191,4
