P. 5
| Tecshow Blinder Lite
English version
Notice
Be sure to follow figures 2 & 3 when making your
own cables. Do not connect the cable
'
s shields
conductor to the ground lug or allow the shield
conductor to come in contact with the XLR
'
s outer
casing. Grounding the shield could cause a short
circuit and erratic behaviour.
Line terminarion
When longer runs of cable are used, you may need
to use a terminator on the last unit to avoid erratic
behaviour.
Terminator reduces signal transmission problems
and interferance. It is always advisable to connect a
DMX terminal, (resistance 120 Ohm 1/4W) between
pin 2 (DMX-) and pin 3 (DMX+) of the last fixture.
Channel Channel
Address
Function
CH 1
0-255
Dimmer
CH 2
1-255
Strobe
CH 3
1-255
Macro Function
CH 4
0-255
Macro Function
Speed Adjust
CH 5
0-255
White Dimmer
CH 6
0-255
White Dimmer
CH 7
0-255
White Dimmer
CH 8
0-255
White Dimmer
Design and product specifications are subject to change without prior notice.
common
DMX-512 Out
3-pin XLR
DMX-512 In
3-pin XLR
XLR MALE SOCKET
FIGURE 3
1 ground
1 ground
2 cold
3 hot
3 hot
2 cold
XLR FEMALE SOCKET
XLR PIN Configuration
PIN 1 = Ground
PIN 2 = Negative
PIN 3 = Positive
FIGURE 2
DMX5121 Control
