5.
Press the ON/OFF switch. All
BLUE
indicator lights will flash as the appliance starts heating.
6.
When the BLUE indicator lights stop flashing, it shows the heating is finished. Turn the
espresso/steam knob towards “
” symbol
，
then press one of the button. There will be hot water
flowing out and the indicator light will flash when working. When the appliance stops pumping water
automatically, the pre-heating is finished.
MAKE ESPRESSO COFFEE
1.
Remove the filter by turning it in clockwise. Add coffee powder into steel mesh, a measure
spoon of coffee power (7g) can make about a cup of espresso, then press the ground
coffee powder tightly with the measure spoon.
NOTE: There are three steel meshes, one is for single-cup, one is for double- cup
and one for the powder pod.
2.
Set steel mesh into filter, make sure the tube on the filter aligns with groove in the
appliance, then fix the filter into the appliance from the “
”position to the “
”
position firmly.
3.
Place the cup (yourself cup) on drip plate.
4.
When the
BLUE
indicator lights stop flashing,, turn the espresso/steam knob towards “
symbol, press one of the button ( Manual
，
1 shot or 2shot button
）
according to your
demand. The indicator light which you have chosen will flash when working. After a
moment, there will be espresso flowing out.
TIPS: The Manual function means the appliance will NOT control the water amount
for brewing espresso. You can control the amount of espresso according to your
demand.
5.
The appliance will stop working when the coffee-brewing is finished, and then your coffee
is
ready now.
NOTE: If you want to pause the appliance during working, you can press any button. Meanwhile,
all the
BLUE
indicators will light up. For continue working, you can press one of the button
( Manual
，
1 shot or 2 shot button
）
. If you turn the espresso/steam knob towards the “
” position,
the appliance will stop the making espresso function.
USER MANUAL
EN
7
