1
Process Signals Source
1 Introduction
This process signals source (the calibrator in the following) is a handheld, battery-operated instrument that
sources electrical and physical parameters.
Features:
Source DC voltage, DC current, resistance, simulate Transmitter, TC, RTD, frequency, pulse and switch.
Others features:
Big LCD can display the TC/RTD measurement value and mV/
Ω
corresponding simultaneously; mA and
mA% simultaneously.
TC source terminals and built-in lead connector of same temperature (RJ compensation with
auto-reference joint point)
Manual step source and auto -step and sweeping –step source
Room temperature monitoring under any operation
2 Contact Us
To purchase parts, obtain operation help or address of the vendor or service center nearest to you, please call
us or visit our web (see the bottom page of the Manual).
TECPEL
