q
y
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
1.
This device may not cause harmful interference.
2.
This device must accept any interference received, including interference that may cause undesired operation.
IMPORTANT NOTE:
1. TO COM PLY WITH THE FCC RF EXPOSURE COM PLIANCE REQUIREM ENTS, A
SEPARATION DISTANCE OF AT LEAST 20CM M UST BE M AINTAINED BETWEEN
THE ANTENNA OF THIS DEVICE AND ALL PERSONS. NO CHANGE TO THE
ANTENNA OR THE DEVICE IS PERM ITTED. ANY CHANGE TO THE ANTENNA OR
THE DEVICE COULD RESULT IN THE DEVICE EXCEEDING THE RF EXPOSURE
REQUIREM ENTS AND VOID USER’S AUTHORITY TO OPERATE THIS DEVICE.
2. THE CHANGES OR M ODIFICATIONS NOT EXPRESSLY APPROVED BY THE PARTY
RESPONSIBLE FOR COM PLIANCE COULD VOID THE USER’S AUTHORITY TO
OPERATE THE EQUIPM ENT.
Note:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the
FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee
that interference will not occur in a particular installation. If this equipment does not cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures: (1) Reorient or relocate the receiving antenna, (2) Increase the
separation between the equipment and receiver, (3) Connect the equipment into an outlet on a\circuit different from that to
which the receiver is connected, (4) Consult the dealer or an experienced radio/TV technician for help.
Department of Communications-Canada
Canadian Compliance Statement
This Class B Digital apparatus meets all the requirements of the Canadian Interference Causing Equipment Regulations.
Cet appareil numerique de la classe B respect les exigencies du Reglement sur le material broilleur du Canada.
This device complies with Class B Limits of Industry of Canada. Operation is subject to the following two conditions: 1)
this device may not cause harmful interference, and 2) this device must accept any interference received, including
interference that may cause undesired operation.
This device is certified to the requirements of RSS-139-1 and RSS-210 for 2.4 GHz spread spectrum devices. The use of
this device in a system operating ether partially or completely outdoors may require the user to obtain a license for the
system according to the Canadian regulations. For further information, contact local Industry Canada office.