manualshive.com logo in svg

TECOM AW4038, User Manual

Share
Download
TECOM AW4038 User Manual Download Page 14

 Manual Ver1.0

Enter IP (LAN IP) and Subnet Mask. 

Select to Disable/Enable DHCP Server, use DHCP Server Relay, and configure 

related settings for that mode. 

AW1038 will assign IP address, subnet mask, Default gateway IP address and 

DNS server IP address to host PCs which connect to its LAN. 

Select “Configure the second IP Address and Subnet Mask for LAN interface” and 

configure if second IP Address is used. 

Note: Network Address Translation function (NAT) is default enabled and is not 

showing on the page to prevent it from being disabled. 

Click on “Next” to go to next step. 

4.1.6

Wireless Setup 

Figure 9. Quick Setup - Wireless Setup 

Check “Enable Wireless” to enable wireless radio; or uncheck to disable. 

“SSID” is the network name shared among all devices in a wireless network. It is 

case-sensitive and must not exceed 32 alphanumeric characters.

Click on “Next” to go to next step. 

4.1.7

WAN Setup – Summary

                                                                                                                                          - 14 -

Summary of Contents for AW4038





























































Reviews:

No comments

Brands by name

Popular brands

Load more brands