TECOM AR1031, User Manual, Page: 35 / 62

Manual Ver1.01
- 35 -
3.3.5 PPP over ATM (PPPoA) Configuration
Click on “Quick Setup” in the left frame, and follow the steps below to create a
PPP over ATM (PPPoA) connection. The following setting steps are all the
same as PPP over Ethernet (PPPoE) steps.
3.3.5.1 ATM PVC Configuration
Give the VPI/VCI values. Please refer to 3.3.1.1.
3.3.5.2 Connection Type
Select “PPP over ATM (PPPoA)”. Please refer to 3.3.1.2
3.3.5.3
PPP Username and Password
Give “PPP Username”, “PPP Password”, and select “Authentication Method”
(AUTO/PAP/CHAP/MSCHAP). Please contact you ISP for the information.
Please refer to 3.3.1.3.
3.3.5.4 IGMP Multicast, and WAN service
Please refer to 3.3.1.4
3.3.5.5 Device
Setup
Set device IP (LAN IP) and Subnet Mask, and DHCP related items. Please refer
to 3.3.1.5.
3.3.5.6 WAN Setup – Summery
The last page gives a summary of previous steps. Make sure that the settings
match the settings provided by ISP, and then click on “Save/Reboot” button to
complete the configuration procedure. Please refer to 3.3.1.6.