TECO TWS-TSO24HFEC, User Manual

Page: 7 / 18

Manual operation
Operating temperature
Mode
Temperature
Room temperature
Outdoor temperature
1. Optimum performance will be achieved within these operating temperatures. If air conditioner
is used outside of the above conditions, certain safety protection features might come into
operation and cause the unit to function abnormally.
2. If the air conditioner runs for a long time in cooling mode and the humidity is high (over
80%) , condensed water may drip out of the unit. Please sets the vertical air flow louver to its
maximum angle (vertically to the floor), and set HIGH fan mode.
NOTE:
Cooling operation
Heating operation
Drying operation
1. Open and lift the front panel up to an angle
until it remains fixed with a clicking sound.
For some models, please use suspension
bars to prop up the panel.
2. Locate the MANUAL CONTROL BUTTON
on the right hand side of the unit.
3. Press MANUAL CONTROL BUTTON once
to activate FORCED AUTO mode.
4. Press MANUAL CONTROL BUTTON again
to turn the unit off.
5. Close the panel firmly to its original position.
NOTE: The unit must be turned off before
operating the manual control button. If the
unit is operational, continue pressing the
manual control button until the unit is off.
17°C~32°C 0°C~30°C
10°C~32°C
Units are equipped with a switch to run emergency operation mode. It can be accessed by
opening the front panel. This switch is used for manual operation in case the remote controller
fails to work or maintenance necessary.
0°C~ 43 °C 0°C~ 43
°C - 7 °C~30°C
Manual control
button
C A U T I O N:
This switch is used for testing purposes only. Please do not use the function unless is absolutely
necessary. To restore the remote controller operation, use the remote controller directly.
6
OPERATING INSTRUCTIONS