11
Step 9.
Place the hinge on the right side and align
the holes before screwing in bolts. Do not tighten
bolts completely until after aligning the door and
ensuring proper seal between the door and the
freezer. Replace the hinge cover.
Step 10.
Once the door is in place and all bolts (top hinge bracket and bottom
hinge bracket) are securely tightened, insert caps on left side of the freezer and
door.
Step 8.
Remove the caps
covering the bolt holes
and door from the right top
side. Place the door onto
the bottom hinge pin.
Step 7.
Fasten the
adjustable leg and frame
screw into the left side of
the freezer.
Step 6.
The hinge pin must be removed
and relocated onto the opposite side
of the bracket. Remove the nut and
washers, relocate the pin, then fasten.
The hinge pin should now be pointing
upward for the door to fi t onto.
Step 6
Step 7
Step 8
Step 9a
Step 9b
Step 10
Summary of Contents for TVF92WMA
Page 18: ...www teco com au LBE PV ...