TECO TBF134WMDB, User Manual

Page: 13 / 18

REVERSING THE DOOR
Follow these steps to reverse the door from the supplied position.
Step 1.
Remove the cover from the door hinge and
remove the two screws holding the hinge bracket.
10
Step 3.
Carefully tilt
the refrigerator back so
the under side can be
accessed. Remove the
adjustable leg and the
two (2) bolts. Remove
the hinge.
25mm
±2mm
15mm
20mm
±2mm
10mm
Step 2.
Lift the door from
the hinge. Place the door
in a safe location to avoid
scratches or damage.
Step 4.
Remove the frame
screw from the upper left
corner (refer to Step 7) and
unscrew the adjustable leg.
Ensure the two bolt holes
are accessible.
NOTE:
The
adjustable foot
attached to the hinge
(
fi gure marked L on
right) is designed to
be used only with the
hinge. It is shorter
than the adjustable
leg on the opposite
side (
fi gure marked H
on right).
Step 5.
Fasten the bracket to the
left side of the refrigerator. Do not
tighten completely to enable slight
adjustments to the door once in
place. Fasten the adjustable leg.
Step 1a Step 1b
Step 3
Step 4
Step 5
H
L