TECO Platinum 3D Inverter Series, User Manual

Page: 11 / 20

8
REMOTE CONTROLLER
• SILENCE
* When the unit is on, press the "MENU" button, then press 1:,. ,
'v , <l and t> to choose the "SILENCE" character, when the
"SILENCE" character will blink, and press the "OK" button to
highlight (not highlight ) the "SILENCE" character , which will
activate (deactivate) the function of silent wind.
•
DISPLAY
* Press the "MENU" button, then press 1:,. , 'v , <l and t> to
choose the "DISPLAY" character, when the character
"DISPLAY" will blink, and press the "OK" button to activate
(deactivate) the function of screen display.
• iCLEAN
* The unit will clean automatically the dusts on the evaporator
and dry or blow-dry the moisture.
* When the air-conditioner is off, press the "MENU" button, then
press 1::,,. , v
,
<I and I> to choose the "iCLEAN" character ,
when the "iCLEAN" character will blink, and press the "OK"
button to highlight ( not highlight) the character "iCLEAN", which
will activate (deactivate) the function of cleaning.
* The cleaning function will close automatically after 30 minutes.
• Child-lock
* Press the "HEAT" and "MODE" buttons at the same time and
hold for at least 3 seconds to activate or deactivate the
child-lock function.
* When the child-lock function is activated, the remote control will
indicate"
□"·
°
• C/
°
F
* The temperature is displayed by default in Celsius.
* Press the "COOL" and "HEAT" buttons at the same time
above 3s, you can set the "°C" or "°F".
Note: Temperature display in Fahrenheit is not available for some
models. When temperature is displayed in Fahrenheit on the
remote controller, it might be in Celsius on the unit, the function
and operation of which will not be affected.