A90
Via Bonazzi, 4 - 40013 Castel Maggiore (BO)
Tel. +39 051 700096 (10 linee) - Fax +39 051 700175
[email protected] - www.tecnotelai.it
!
/
!
2 4
EXTRACTION OF DRAWERS.
Completely pull out the drawer
and slightly raise the front part.
""
"
SEPARATORS.
After inserting them it is
necessary to use the screws
supplied (2 for the slotted
ones and 1 for the smooth ones)
to stiffen the bottom.
INSERTION/REPLACEMENT OF DRAWERS LABELS.
With a screwdriver push the plastic closing cap towards the
outside to replace the labels.
Using pressure, fit the cap (right and left)
""
""
MOVING THE DRAWERS.
Remove the locking hooks "
A
" to free the guides "
B
";
reposition and lock them again with the hooks.
Slotted
longitudinal
separator
Smooth
transverse
separator
insertion
replacement
FITTING THE ADJUSTABLE SHELF.
Insert, at the same height, 4 hooks (
G
),
two front and 2 rear,
in the appropriate slots.
Place above the shelf (
H
).
ANCHORING THE CABINET TO THE FLOOR.
After positioning the cabinet, mount it to the floor with
2 anchors of external ø 8x75 (screw M8).
""
""
WALL MOUNTING.
After positioning the cabinet, remove the drawers.
Drill 2 holes in correspondence with the existing ones
in the top of the back of the cabinet and attach with
appropriate anchors and washers.
1
2
3
4
5
6
7
