27
Accessories for
Air Conditioning
Ventilation
Solutions
Air Curtains and
Accessories
Accessories
For Heating
Instruments &
Tools
Multi - Zone
Air Control System
The recovery unit must be put in the original packaging in a ventilated area at a temperature
ranging b10°C and +40°C.
The air must not contain potentially aggressive vapours or chemical mixtures that might cause
corrosion or compromise the integrity of the connections.
For handling, use only adequate lifting equipment, in order to prevent damage to the fan following
falls or excessive shaking. Follow the applicable regulations for transportation according to the
type of load.
The recovery unit can be transported with any means, provided that adequate protection against
atmospheric agents and mechanical damages is ensured. Avoid jolts and collisions during
transportation and handling operations.
Possible causes
Management of faults
The fan does not start
when the recovery unit is
turned on.
No power supply.
Check that the recovery unit
is correctly connected to the
mains supply and connect it, if
necessary.
The motor is blocked, the
impeller is blocked.
Turn off the recovery unit. Find
the cause of the motor blockage
and unblock the fan. Clean the
blades. Restart the fan.
Switch is automatically
activated after turning on.
Overcurrent due to
a short-circuit in the
electrical circuit.
Turn off the recovery unit.
Contact customer service.
Insufficient air flow
Speed set low.
Set a higher speed.
The filter, the fan or the
exchanger are dirty.
Clean or replace the filter, clean
the fan and the regenerator.
For the regenerator and filter
maintenance, please refer to
page 26.
TROUBLESHOOTING
TRANSPORTATION AND STORAGE
Summary of Contents for ACD100031
Page 14: ...Sistemi 14 NOTE...
