21
MAINTENANCE
REPAIRS
CLEAN and BLOW OFF all parts before doing the assembly.
6.
Lubricate the motor plates and both ball bearings with SAE 10 oil.
7.
Place the motor plates in their seatings, the motor stator in its right
position, install the upper head together with its ball bearing and mount
the “seeger” ring.
8.
Take the whole rotor assembly and insert it vertically and without
turning it so that the rod is introduced into the hole provided in the
bottom of the motor casing (see drawing page 20). Once having placed
the rod in its seat, screw the whole assembly (LEFT-HAND THREAD)
and tighten it with the belt key.
9. Install the intake tube to the motor.
