4 of 12
IU_Pulse_01_eng
User instructions
Pulse
Important notes
!
Before installing this product, please read carefully the installation and operating
instructions.
Locks have been designed to correctly operate in a temperature range from -5°C (23°F)
to + 50°C (122°F) and in an environment with non-condensing humidity between 25%
and 90%.
The lock must not be oiled/lubricated/greased.
If installed in normal domestic or office environments, the locks do not require particular
maintenance; in any case, after 10,000 opening/locking cycles, it is recommended to run
a test that verifies the correct and complete operation of the product.
Use only DURACELL™ 9 Volt Alkaline batteries, or battery holders with DURACELL™ 1.5
Volt Alkaline batteries. Alternatively, it is possible to use a 12VDC - 1A power adapter
(p.n. N1212) with relative power supply interface (p.n. T6005/W or p.n. T6005).
A series of multiple beeps indicate a low battery level which need immediate replacing.
It is strongly recommended to change the default codes before usage and to keep the
new codes safe.
Do not use codes easily guessed such as 123456, birth dates or based on personal
information.
After changing a code, perform several opening/closing tests before closing the door.
Should the lock label be removed, warranty is void.
