Tecnosicurezza MiniTech T52 Series, Installation Instructions Manual

Page: 4 / 20

4 of 20 II_ MiniTech_05_eng
Installation instructions
MiniTech
N42170/M Magnetic Dallas key connection cable.
N1996RM Magnetic Dallas key for audit.
T42146/J Setup and audit cable.
Certifications
The updated product certifications are available on the official websites of Tecnosicurezza:
www.tecnosicurezza.it www.tecnosicurezza.es www.usatecno.com
Important notes
!

Before installing this product, please read carefully the installation and operating
instructions.

Locks can be installed in all traditional safes.

Lock has to be mounted on secure storage metal (preferred steel) units only.

Locks must be protected against external attacks, for this reason it is recommended to
install them on the door away from any through holes (except DeadBolt and MotorLock).

If locks are not properly protected by systems belonging to the safe (manganese plates,
glass plate, relocking, etc.) only DeadBolt and MotorLock locks can be mounted behind
the passage hole for the connection cable or the spindle.

Any electronic part must be properly protected and not easily accessible even when the
door is open.

Locks have been developed to work correctly in a temperature range from -5 ° C to + 50
° C and in an environment with non-condensing humidity between 25% and 90%.

The mounting dimensions are standard (magic module).

For keypad and lock installation, use only the screws provided by Tecnosicurezza. Any
other screw must be approved in advance.

Locks are supplied with metric (M6) mounting screws. Upon request, Imperial 1/4-20 UNC
format mounting screws are available.