Set relay opening / closing mode
This func on allows you to set the device access mode.
In par cular it is possible to ac vate / deac vate the output connected to the reader through the following op ons:
Op on 1) with PIN code detec on only;
Op on 2) with card / tag detec on and subsequent PIN code entry;
Op on 3) with card / tag detec on or by entering the PIN code
(Default).
Op on 1 programming)
Select relay opening / closing with ONLY PIN code detec on
Working descrip on
Keystroke combina on
Entering the programming mode
(Digit Master Code)
Select relay opening / closing with card / tag
detec on ONLY
Exit from programming mode
Op on 1 using)
Open / close the relay with PIN code
Open / close the relay with PIN code detec on
(Digit PIN code)
Op on 2 programming)
Select relay opening / closing with card / tag detec on and subsequent PIN code entry
Working descrip on
Keystroke combina on
Entering the programming mode
(Digit Master Code)
Select open / close relay with card / tag detec on
Exit from programming mode
Op on 2 using)
Open / close the relay with card/tag detec on and subsequent PIN entry
Open / close the relay with card/tag detec on and
subsequent PIN entry
(Read card on the keypad) (Digit PIN code)
Op on 3 programming)
Select relay opening / closing with card / tag detec on or with PIN code entry
(Default)
Working descrip on
Keystroke combina on
Entering the programming mode
(Digit Master Code)
Select relay opening / closing with card / tag
detec on or with PIN code entry
Exit from programming mode
Op on 3 using)
Open / close relay with card / tag detec on or PIN code detec on
(Default)
Open / close the relay with card / tag detec on
(Read card on the keypad)
Open / close relay with PIN code detec on
(Digit PIN code)
