Tecno-gaz Master-Flux, Instructions For Use Manual, Page: 45 / 116

ENGLISH
15
6.3 Connecting circuits and accessories:
A
B
C
E D
F
26
17
18
H
Figure A9
(FIGURE A9)
Connect the Rubber bag (F) to the flowmeter box by pressing it onto the relative nozzle.
The mask kits are connected to the device by the nozzle (H) .
The kits differ based on the version of the acquired device:
MASTER FLUX - Art. 1500/AS and
1501/AS
Connect the spiral tube (26) to the nozzle
(H) .
Connect the gas supply tube for the mask
to the spiral tube, placing the supplied fitting
in between
(27 - figure A4) .
The gas exhaust tube will be connected in
different ways, based on the type of gas
evacuation system that is being used.
(see 6.4 - EVACUATION OF EXHALED
GASES)
.
MASTER FLUX PLUS - Art. 1600/AS and
1601/AS
Connect the gas supply tube for the mask
to the nozzle
(H) .
The gas exhaust tube will be connected in
different ways, based on the type of gas
evacuation system that is being used.
(see 6.4 - EVACUATION OF EXHALED
GASES)
.