UNPACKING
• Open the carton being careful do not damage the appliance with sharp tools,
•gently pull up the stove out from the packing, beware the glass,
•remove all the protections and packing materials before using the stove and make sure you have removed
all the accessories inside.
INSTALLATION
After unpacking the appliance, place it in a secure and stable place that has been awarded, making sure that
there is enough space for the preliminaries.
Make sure that the intake air grid remains always free.
Place the components as in figure. A
letting the screw to the concave side of
the magneto
Screw the feet into right mounting
holes at the basement of the stove
Pull the rod pulling to the botton and
insert it in its seat,
read and take out
the pictograms sticker above the
burner
The stove do not requires chimney, anyway the room must be ventilated each hour of use.
The stove must be installed in compliance with the following safety conditions:
-Keep a minimum distance on the sides, in front of and above of 50 cm and 10 cm on the back by an average
of flammable materials;
-If the stove is installed on a floor that can be damaged, place in between a layer of heat insulating materials;
This stove cannot be used in place tightly closed, basement place level, or too small as
campers, trailers, passenger cars, boats …
Pag. 21 di 29
4. INSTALLATION