Tecnimoem Powerlift 135 Mini Hoist, User Manual

Page: 41 / 55

42
POWERLIFT 150/135 Mini/175 User manual
4.7. Overload
Control box beeps twice if the actuator is overloaded (above the current limit), it
will cut the current and the actuator will stop. The actuator can be started again
when the overload is removed.
4.8. Improper use
Improper use of this hoist may result in injury to the users and/or damage to the
device, in addition to invalidating the warranty. Examples of improper use are:
• Use by persons who have not read this user manual and/or who have not been
trained by a member of the authorised personnel.
• Use of the hoist, functions, accessories or movement by persons not qualified to
operate the device safely.
• Use of the electrical functions by more than one person simultaneously.
• Use with a load exceeding the maximum working load displayed on the hoist.
• Faulty connection to the mains when charging the battery.
• Connecting any devices to the hoist that have not been authorised by the ma-
nufacturer.
• Pulling the power supply cable to move the hoist.
• Cleaning the hoist with excessive water, pressure jets or in a wash-tunnel.
• Using the hoist outdoors or to move a patient inside a vehicle.
• Using the hoist on soft, unprepared terrain.
• Using the hoist on terrain with a slope gradient greater than 5º (loaded with a
patient).
• Extreme, intensive use of the actuator failing to observe the maximum working
load displayed on the label.
• Using devices and/or accessories other than those recommended by the ma-
nufacturer.
• Any other use of the hoist that is not in accordance with its intended purpose.