background image

21

22

TecNet warrants each new radio product manufactured 
or supplied by it to be free from defects in material and 
workmanship under normal use and service for the time 
period stated, provided that the user has complied with the 
requirements stated herein. The warranty period begins on 
the date of purchase from an Authorized TecNet Dealer. 
This  warranty  is  not  assignable  or  transferable.    This 
warranty is void if the product serial number is altered, 
defaced or removed. TecNet is not responsible for any 
equipment  that  is  attached  to  or  used  in  conjunction 
with our products. 
During the warranty period, if the product fails to function 
under  normal  use,  because  of  manufacturing  defects  or 
workmanship,  it  should  be  returned  to  the Authorized 
TecNet  Dealer  from  which  it  was  purchased.  The 
Authorized  TecNet  Dealer  will  repair  the  product  or 
return the product for repair to TecNet or its Authorized 
Repair Depot. The user is responsible for the removal of 
the product from a vehicle or any equipment attached to 
it, or other site of its use; transportation of the product to 
the  Authorized  TecNet  Dealer;  for  the  return  of  the 
repaired or replacement product to the site of its use and 

Warranty Statement

TecNet International, Inc. offers to the original end user:

One (1) Year Limited Warranty on TecNet Spartan Series 
Radios (separate warranty period on accessories).  

One  (1)  Year  Limited  Warranty  on  Accessories 
(includes,  but  not  limited  to,  batteries,  antennas,  belt 
clips, chargers, audio accessories, nylon cases, leather 
cases, etc.) and TBM Series Bluetooth kits.

for the reinstallation of the product.
TecNet shall have no obligation to make repairs or replacement 
of product which results from normal wear and tear, or 
is necessitated by catastrophe, fault, or negligence of the 
user, improper or unauthorized alterations or repairs to the 
product, incorrect wiring, use for which it was not designed 
or by causes external to the product. TecNet’s sole obligation 
shall be to replace or repair the product covered by the 
warranty. Replacement is done at TecNet’s discretion and 
may consist of a similar or higher featured product. Repair 
may include the replacement of parts with functionally 
equivalent new or reconditioned parts. All replaced parts 
and accessories are warranted for the balance of the original 
time period. All parts and accessories that are replaced 
become the property of TecNet International Inc.

THE EXPRESS WARRANTIES CONTAINED HEREIN 
ARE IN LIEU OF ALL OTHER WARRANTIES, EITHER 
EXPRESSED  OR  IMPLIED  OR  STATUTORY, 
INCLUDING,  WITHOUT  LIMITATION,  ANY 
WARRANTY OF MERCHANTABILITY OR FITNESS 
FOR A PARTICULAR PURPOSE. 
FOR  ANY  PRODUCT  THAT  DOES  NOT  COMPLY 
WITH  THE  WARRANTY  SPECIFIED,  THE  SOLE 
REMEDY WILL BE REPAIR OR REPLACEMENT. IN 
NO  EVENT  WILL  TECNET  BE  LIABLE  FOR ANY 
D A M A G E S ,   I N C L U D I N G   A N Y  S P E C I A L ,  
INCIDENTAL,  INDIRECT  OR  CONSEQUENTIAL 
DAMAGES, OR THE LOSS OF PROFIT, REVENUE 
OR DATA ARISING OUT OF THE USE OF OR THE 
INABILITY TO USE THE PRODUCT.

W

arranty Statement

Frequency Stability

Receiving Sensitivity

Audio Power

Weight 

Dimension  

±2.5PPM

0.2

700mW

170g

105×54×30mm

Channel Number

Normal  Voltage

Working Temperature

16

DC 3.8V

-25

~55

Output Power

2W/1W  

Appendix I: Specification

Appendix 

Appendix 

Li-ion Battery

2000mAh

Antenna Impedance

TS-2116/TS-2416

Item

Frequency Range

136~174MHz/400~470MHz

Modulation Mode

Max. Frequency

 Deviation

Audio Distortion

≤±

5/2.5kHz

5%

Summary of Contents for TS-2116

















Reviews: