Tecnet HL-1500, Owner'S Manual

Page: 11 / 16

L
AND
M
OBILE
R
ADIO
HL-1500 SERIES
L
AND
M
OBILE
R
ADIO
HL-1500 SERIES
HL-1000 Function Summary
20
19
88.. B Baatttteerryy U Ussee & & R Reecchhaarrggee
To reduce battery consumption, the "Battery Save" circuit will be activated
when the radio is idle. The user may also set & control the 'battery save
time' through the PC programming software. Default is set for Headline's
standard battery save time.
BATTERY SAVE FUNCTION
(1) The Li-ion / Ni-Mh batteries used for HL-1500 series are highly
efficient, stable and reliable.
(2) Charge the battery to its full capacity before using to achieve its
maximum capacity and to allow stable operation of the radio.
(3) Allow the battery to be completely drained before recharging.
A warning beep will sound to alert the user that the battery needs to
be recharged.
(4) Battery is designed for use only with the provided charger.
(5) The radio must be powered off when charging of the battery.
(6) Should the battery terminal short-circuit through carelessness or
misuse, the battery could burn itself or cause a fire.
(7) Do not allow the battery terminal to come into contact with metal or
any conducting material as it could cause damage and result in
injury.
1) CAUTION IN CHARGING THE BATTERIES
(1) When the radio's performances become unstable due to low voltage
of battery.
(2) When the Red LED indicator is blinking.
(3) When the battery indicator is blinking on the LCD screen.
(4) When the warning beep sounds every 10 seconds when the radio is
in use.
2) WHEN TO CHARGE
77.. H HLL - 11550000 FFuunnccttiioonn S Suum mm maarryy
INPUT
FUNCTION
CONTROL KEY
FUNCTION DESCRIPTION
Key
Button
&
Exernal
PC
Program
Exernal
PC
Program
SQUELCH
BEEP ON / OFF
DTMF ON / OFF
2TONE ANI ON / OFF
CHANNEL SCAN
VOX MODE ON / OFF
VOX SENSITIVITY
QUICK CALL ON/OFF
KEY LOCK ON / OFF
CLON MODE
REGISTER / CANCEL OF
SCAN CHANNEL LIST
PASSWORD MODE
BATTERY WARNING BEEP
BCLO SELECTION
TOT SELECTION
TOT TIME SETTING
BATTERY SAVE
SETTING
SCAN TIME SETTING
SCAN TYPE SETTING
DTMF SETTING
BCLO TYPE SELECTION
VOX SETTING
2TONE TYPE SELECTION
2TONE OPTION SETTING
INPUT 2TONE ID /
ANI SELECTION
Controls Receiving Sensitivity
Turns Beep sound On / Off
Locks channel in use
Sets DTMF transmitting On / Off
Sets 2TONE ANI On / Off
Sets Channel On / Off
Sets VOX mode On / Off
Sets the VOX sensitivity level
Sets QUICK CALL Mode On / Off
Allows cloning of two units (using the Cloning cable)
Allows for Entry and Cancellation of scan
channels
Password input / delete
Sets low Battery indicator ON/OFF
Enables/Disables BCLO setting
Selects BCLO type
Enables/Disables Time-Out-Timer setting
Selects Time-Out-Timer setting
Sets Battery save time in wait mode
Sets Channel Scan time
Sets the SCAN type
Sets the DTMF ID / Time
Sets 2TONE type (11 types available
including EEA)
Sets 2TONE time
Sets the VOX delay time
Sets 2TONE ID input / ANI
1 TIME
2 TIMES
3 TIMES
4 TIMES
5 TIMES
6 TIMES
7 TIMES
8 TIMES
Press For 2 Seconds
+ POWER SWITCH
PTT + POWER SWITCH
ON / OFF
Enable / Disable
Carrier / Repeater
Enable / Disable
TOT Time / Penalty time
ON/OFF / ACTIVE TIME
DWELL TIME / TX TYPE
SA Combi / Carrier
ID & TIME INPUT
Delay Time INPUT
ID INPUT & ANI ON/OFF
2TONE TYPE SETTING
2TONE OPTION
SETTING
Battery Use & Recharge
The radio will turn off automatically if the battery
voltage is too low for radio operation.
* Note :
+
+ POWER SWITCH