TECNARE DP Series Operation Manual Download Page 9 | Manualshive

Page: 9 / 35

TECNARE DP Series Operation Manual Download Page 9

Digital Loudspeaker Controller

DP-2696 Operation Manual

DP Series | rev.

firm. 1.480 and above

8

1

Welcome

1.1 Thanks and unpacking

Thank you for choosing a Tecnare

®

DP-2696

Digital Loudspeaker Controller

for your

application. We are confident that you will be pleased with the performance, unique features,
configuration flexibility, reliability, and long-term durability offered by this product.

Please spare a little time to study the contents of this manual, so that you obtain the best

possible performance from this unit. Control and editing features are accessible via the front
panel interface or via the included Podware software.

All Tecnare

®

products are carefully engineered for world-class performance and reliability.

If you would like further information about this or any other Tecnare

®

product, please

contact us. We look forward to helping you in the near future.

Information and specifications are subject to change. Updates and supplementary

information are available on the Tecnare

®

website:

http://www.tecnare.com

Tecnare Technical Support is available at:



(T): +34 918 170 110 - +34 918 171 001



(e-mail): support@tecnare.com

Thank you again for placing your confidence in Tecnare

®

products.

1.2 Unpacking

After unpacking the unit please check carefully for any damage to the device or the supplied

accessories. Every Tecnare product is tested and inspected before leaving the factory and
should arrive in perfect condition. If damage is found, please notify the carrier concerned at
once. You, the consignee, must instigate any claim. Please retain all packaging in case of future
re-shipment.

«
...
7
8
9
10
11
...
»

Summary of Contents for DP Series




































Reviews:

No comments