Tecnam P2008 JC, Flight Manual

Page: 98 / 264

Page 5 - 2
Section 5 - Performance
INTRODUCTION
Ed. 1, Rev. 0
1. INTRODUCTION
This section provides all necessary data for an accurate and comprehensive plan-
ning of flight activity from take-off to landing.
Data reported in graphs and/or in tables were determined using:
 “Flight Test Data” under conditions prescribed by EASA CS-VLA regulation

aircraft and engine in good condition

average piloting techniques
Each graph or table was determined according to ICAO Standard Atmosphere
(ISA - s.l.); evaluations of the impact on performance were carried out by theoret-
ical means for:

Airspeed

External temperature

Altitude

Weight

Runway type and condition
2. USE OF PERFORMANCE CHARTS
Performance data are presented in tabular or graphical form to illustrate the effect
of different variables such as altitude, temperature and weight. Given information
is sufficient to plan the mission with required precision and safety.
Additional information is provided for each table or graph.