Operation/installation/service manual
MACERATOR TOILETS
Manuale di utilizzo / installazione / manutenzione
TOILET MACERATRICI
X-light / Privilege / Evolution / Breeze / E-Breeze / Silence Plus / Elegance / Saninautico / Prestige
20
www.thetfordmarine.com
/
TECMA SRL – Via Flaminia / Loc Castel delle Formiche/ 05030 Otricoli (TR) / Italy
Manual rev 25.2014
©TECMA SRL
3.2 Elettrovalvola
L’Elettrovalvola Invensys può essere installata sia integrata nel vaso, direttamente al portagomma
(attraverso adattatore non fornito), che sulla linea di alimentazione acqua dolce.
Prima del montaggio eliminare lo sporco dalle tubazioni (residuo di brasatura, perle di saldatura,
trucioli metallici, materiale di tenuta).
Un filtro all’interno dell’elettrovalvola previene avarie causate dalle impurita dell’acqua. E’
raccomandato tenere il filtro dell’elettrovalvola pulito. Non far leva sulla valvola durante
l’avvitatura. Non ostruire il foro pilota all’uscita della valvola. Deve essere disponibile l’intera
sezione della tubazione senza strozzamenti. Osservare il campo di pressioni raccomandato (vedi
sezione 7.0).
3.3 Pompa di immissione
Montare la pompa di immissione in un luogo asciutto, ventilato. La pompa non può essere
sommersa o esposta a spruzzi.
Prevedere un adeguato fusibile nel circuito di alimentazione.
La pompa può essere montata sia orizzontalmente che verticalmente (in questo caso orientarla con
l’unità pompante verso il basso).
Montare il filtro prima della pompa.
Installare una valvola di ventilazione per prevenire fenomeni di sifonaggio, specialmente se la toilet
è installata sotto la linea di galleggiamento
ATTENZIONE: La pompa di immissione non funge da valvola di non ritorno, il mancato
utilizzo di una valvola di ventilazione può provocare allagamenti con rischi di perdita
dell’imbarcazione, infortunio o morte.