The three new DMX channels are:
-Scene channel
-From 0-255 are displayed the programmable scenes (max 16 scenes M.001 M016)
-View channel:
-From 1-19 the unit runs the scene that has been saved in the unit memory and it is possible to
play through the other scenes using the scene channel.
-From 20-235 the unit runs the configuration given by the received input DMX values. With the
channel scene it is possible to pass from one scene to the next,while with REC it is possible to
record the selected scene.
-From 236-255 the unit runs the configuration given by the received DMX values from the projector
in that moment. It is possible to select a scene and then close the GAME P with the REC channel.
-Recording channel (REC)
Records the set scene with a variation from 0 to 255 (the display flashes indicating that the scene has
been recorded).
You must keep the REC channel set to 0 and to run through the 255 only once you have decided to save
the scene. If GAME P is not closed, by indicating the last scene, in playback mode all 16 scenes will be
played through even if not programmed.
You can set the PAN and TILT motors at high speed on your Spot 575 TM3.
Press menu until you see SPEE.
Press ENTER and select a speed with UP-DOWN (there are 4 speeds). Confirm by pressing ENTER.
When you use speed 4 (the highest) PAN and TILT speed is very high and your projector may loose its
path. In this case, the encoder corrects the position.
Fan speed regulation makes it possible to reduce fan noise. However, the ambient temperature must be
less than 35° C.
12- ERROR MESSAGES:
10- PAN & TILT SPEED (SPEE) (default: 2)
11- FAN SPEED (FANS)( default: 12)
ERROR: COLOR WHEEL POSITION
ERROR: GOBO WHEEL POSITION
ERROR: ZOOM POSITION
ERROR: GOBO ROTATION POSITION
ERROR: INTERNAL
COMMUNICATION
ERROR: AUTO MODE INPUT
ERROR: ENCODER PAN
ERROR: ENCODER TILT
ERROR: DMX ADDRESS
ERROR: LOAD DATA
EEPROM
ERROR: SENSOR CIRCUIT
COLOR/ZOOM
ERROR: SENSOR CIRCUIT
GOBO/GOBO ROTATION
ERROR: SYNCHRONIZED
FREQUENCY MEASURE
(SYNCHRONISM FOR LAMP ON)
ARC 1200
15
Spot 575 TM3
