22
6. Gentle function
When the Gentle function is selected, the LED of Gentle shall illuminate, and the program will give
less heat to protect sensitive textiles from high temperature, which may harm to these textiles, such
as acetate, elastane etc.
7. Drum light
For your convenience, this function can help you to see clearly, when you open the machine door.
8. Auto Anti-crease function
To avoid the clothes creasing after the program
�
inished, the dryer will automatically intermittent
rotate about 2 hours.
7. Cleaning and maintenance
Clean the lint
�
ilter
Leave the dryer to cool down.
1. Open the machine door.
2. Take out the lint
�
ilter, pull upward to take it out.
3. Clean the lint
�
ilter; wipe off the scrap threads accumulated on the lint
�
ilter.
4. Reinstall the lint
�
ilter.
NOTE!
1. The lint
�
ilter accumulated on
the �
ilter will block the air circulation, which will cause the
extension of drying time and energy use; therefore, the scrap thread
�
ilter shall be cleaned after
each use.
2. Do disconnect the power cord before cleaning!
3. Do not operate the dryer without the lint
�
ilter!
4. Clean the lint
�
ilter after each use to prevent lint accumulation inside the dryer.
Wash air condenser
-Leave the dryer to cool down. -Residual water may escape, place an absorbent
cloth under the maintenanc
e �lap
.
1. Unlock the maintenanc
e �
lap.
2. Completely open maintenance
�l
ap.
3. Screw both locking levers towards each other.
4. Pool out the air condenser.
5. Clean the air condenser completely, drain thoroughly.
6. Clean the seals.
7. Re-insert the air condenser handle at the button!
8. Unscrew both locking levers.
9. Cloth the maintenanc
e �l
ap until it locks into position. Please clean the air
condenser if frequently used. Do not damage the air condenser!
Warning
1. Clean with warm water only; do not use hard/sharp-edged objects! Do not
operate the dryer without the air condenser!
2. During drying, water may collect between the window and the seal, but this does not affect the
function of your dryer!
