Customising the keys
Using M1 as an example:
1. Press and hold the MR key then press the M1 key and then
release both keys. The yellow LED on the “Mr” key will flash.
2. Enter the custom key features that you want (such as: Z, D, R, T, H etc).
3. Press the “Mr” key again to save your choice of functions. After
successfully saving the custom function, the yellow LED on the “Mr”
key will flash 5 times.
4. Follow the same procedure for customisation of the other M1-M10 keys.
5. Each user-defined key (M1-M10) is capable of being customised with
a function consisting of up to 40 different characters (letters, numbers
and other arbitrary symbols).
6. Note: Character “€”, press Ctrl+Alt+4(only available in UK version).
Changing the user-defined keys:
1. Press and hold the MR key then press the M1 key and then
release both keys. The yellow LED on the “Mr” key will flash.
2. Select the new functions you want (such as: Z, D, R, T, H etc).
3. After selection, press the “Mr” key again to save the function and
the yellow LED on the “Mr” key will flash 5 times to indicate that
the new function has been saved.
4. Follow the same procedure to change user-defined functions for
the other M1-M10 keys.
Clear a user-defined function key
To clear a single user-defined function key (eg M1) press the “Mr”+“M1”
and the yellow LED on the “Mr” key will start flashing. Press “M1” and
then press “Mr” to save the change. The yellow “Mr” LED will stop
flashing, indicating that the function of the M1 key has been deleted and
there is no longer any user defined function. Follow the same procedure
to clear user-defined functions for the other M1-M10 keys.
Clear all user-defined functions
To clear all user-define function keys, simultaneously press
“FN+Del”("FN + Entf" for DE version). The backlight will flash and the
yellow “Mr” LED will illuminate. When the yellow “Mr” LED goes out, all
the user-defined functions are cleared.
04
