18-Month Battery Life
The mouse consumes little power and offers a long battery life up to
18 months without changing battery. However please note that the
actual battery life may vary with using conditions.
Install the Battery
The RF 2.4GHZ optical mouse uses one AA battery (Battery is
not
included).
1. Press the button at the bottom of the mouse as shown in the picture
below. The battery compartment cover will open.
2. Take out the battery compartment cover on the bottom of the mouse.
3. Insert the battery into the compartment, ensuring they correspond
with the polarity markings.
4. Replace the battery cover.
5.
The red LED of the power indicator at the top of the mouse will flash
for 10 seconds.
Note: Make sure that the polarity of the batteries is correct. The positive (+) and
negative (-) ends of each battery must match the positive (+) and negative (-)
markings in the battery housing.
USB Nano Receiver
The receiver can be removed and stored at the bottom of the mouse
as shown in below pictures.
Intelligent Power Saving (IPS)
The mouse is equipped with Intelligent Power Saving (IPS) function.
• When the USB Nano receiver is disconnected or the PC is switched
off, the mouse will be switched off automatically for the purpose of
power-saving.
• When your mouse is not operated for 3 seconds, it will automatically
drop to the first level of IPS. To wake the mouse, click any button.
• When your mouse is not operated for 10 seconds, it will
automatically drop to the second level of IPS. To wake the mouse,
click any button.
• When your mouse is not operated for 8 minutes, it will automatically
drop to the third level of IPS, e.g. sleep model. To wake the mouse,
click any button.
DPI Switch
The mouse supports 2000 DPI, 1500 DPI and 1000 DPI. To switch to
either setting, press the DPI button.
• The default setting is 1000 DPI.
• Short press the DPI button on the top of the
mouse once to switch from 1000 DPI to 1500 DPI,
the scroll wheel LED will flash twice.
• Short press the DPI button on the top of the
mouse once again to switch from 1500 DPI to
2000 DPI, the scroll wheel LED will flash three
times.
• Short press the DPI button on the top of the
mouse once again to switch from 2000DPI to
1000 DPI, the scroll wheel LED will flash once.
2
1
Take out the receiver
Store the receiver
DPI Switch
EN
