1. Connect the AC Power Cord to the Power Adapter and the DC
Output Cord to the TeckNet U510P Charger’s corresponding
socket.
2. Connect the AC Power Adapter to an AC power socket.
3. Connect your mobile phone or other devices to the TeckNet U510P
charger using your existing USB charging cables.
4. Disconnect the devices and AC Power Cord from the power socket
when charging or powering is finished.
5. Disconnect the AC Power Cord from the TeckNet U510P Charger
Warning
Before using this product for the first time, please carefully read and
follow all instructions and warnings.
1. Please do not modify, disassemble, open, drop, crush, puncture
and shred the product.
2. Do not put this product in damp, direct sunlight or high temperature
environments.
3. Misuse, demolition, mishandling or other operation of the product
that fails to comply with this manual may result in damage the
connected device or to the USB Charger Hub. In the event of
damage resulting from such types of actions, TeckNet is not liable
for compensation or maintenance responsibility.
4. This product is not a toy, keep it away from children and ensure that
all persons who use the product read and follow these instructions
and warnings.
Disclaimer
Every effort has been made to ensure that the information and
procedures in this guide are accurate and complete, no liability can be
accepted for any errors or omissions and we reserve the right to make
any changes without further notice to any products mentioned herein.
Warranty
We warrant that product from authorised distributors will meet the
applicable product specifications and be free from all defects in
design, assembly, material and workmanship. Please contact
TECKNET retailers, or visit our website for more information about the
product.
1. The Super Charging Ports will detect any attached devices and will
self-adjust to the optimum charging status thereby avoiding any c
ompatibility issues. It enables the supply of stable, reliable power
for any high power devices such as iPad, iPhone, Galaxy Tab &
Note, Sony Xperia, HTC One etc. Attach devices to the Super
Charging Ports if any potential compatibility issue arises.
2. Specific ports on the TeckNet U510P Charger are designated as
Super Charging Ports while the others are universal charging ports.
3. Check the input voltage of the digital devices is suitable before
initiating the charging process.
4. Use only indoors.
5. During charging, the Smart USB Charging Port Controller of each
Super Charging Port will be automatically optimised to the specific
mode for the attached device. This mode is only for the attached
device type and may not work for other device models. To
auto-optimise the Super Charging Port for a different device type,
please restart the optimisation by turning the power OFF and
turning the power ON. This will allow the Smart USB Charging Port
Controller reset and self-adjust the optimisation for the next type of
device.
6. Continuous use of the charger at full-load (21A) may lead to
overheating.
-- 4 --