06
NOTES and Tips for Use:
The mouse will be in Standby State to save power if not in use for 8
minutes. Click the mouse to wake up the device. After connection
completion, if unplug the adapter or shut down, device will be power
saving state so there is no need to reconnect to the computer, just
click the device to active function.
If press the connect button carelessly during use, Bluetooth will be the
reconnection state. Connection will be ok after 10 minutes or reinstall
the battery again.
If have any interruption to connection, please reconnect. If reconnection
fails or the device is unresponsive, delete the original Bluetooth
connection and reconnect by the above steps mentioned.
Intelligent Power Saving (IPS)
The mouse is equipped with intelligent Power Saving (IPS) function.
•
When the PC is switched off, the mouse will be switched off
automatically for the purpose of power-saving.
•
When your mouse is not operated for 3seconds, it will automatically
drop to the first level of IPS. To wake the mouse, click any button.
•
When your mouse is not operated for 10 seconds, it will automatically
drop to the second level of IPS. To wake the mouse, click any button.
•
When your mouse is not operated for 8 minutes, it will automatically
drop to the third level of IPS, e.g. sleep model. To wake the mouse,
click any button.
DPI Switch
The mouse supports 1000DPI, 1500DPI and 2000DPI. To switch to
either setting, press the DPI button.
•
The default setting is 1000DPI.
•
Short press the DPI button on the top of the
mouse once to switch from 1000DPI to 1500
DPI, the scroll wheel LED will flash twice.
•
Short press the DPI button on the top of the
mouse once again to switch from 1500DPI to
2000DPI, the scroll wheel LED will flash three times.
•
Short press the DPI button on the top of the mouse
once again to switch from 2000DPI to 1000DPI, the
scroll wheel LED will flash once
DPI Switch