MOUNTING
Chassis installation
Note : Normally, the TVC-981T chassis is already
mounted.
If it's not the case,
1. Turn the unit up side down carefully and place it
on a soft surface.
2. Route the power cord (1) through the base and the
center of the nut.
3. Insert the base onto the appliance (3), centering it
to match the holes in the base (5 B) and holes in the
foot (5 A), so that the screws can be inserted later.
4. Screw the nut (2) clockwise onto the thread of the
appliance.
(in the opposite direction when dismounting the
chassis).
5. Secure the power cable (1) through the lugs (2) of the base channel (1).
6. Turn the unit over and place it on its foot, on a flat surface.
8