background image

If the supply cord is damaged, it must be replaced by the manufacturer, its 
service agent or similarly Competent qualified person

(*)

 in order to avoid a 

hazard.  

Disconnect the power source cable before any operation of cleaning of 
maintenance and accessories assembly. 

Never use the appliance outside and always place it in a dry environment. 

Never use accessories, which are not recommended by the producer.  They 
could constitute a danger to the user and risk to damage the appliance.  

Never use any other connector than the one provided. 

Never move the appliance by pulling the cord. Make sure the cord cannot get 
caught in any way.   

Never wind the cord around the appliance and do not bend it 

Ensure that the power cord does not come into contact with hot parts of this 
unit. 

Make sure the appliance has cooled down before cleaning and storing it.  

The temperature of accessible surfaces may be very high when the appliance 
is operating. Never touch these parts, of apparatus, to avoid burning itself.

 

 

Make sure the appliance never comes into contact with flammable materials, 
such as curtains, cloth, etc...& the power cord and plug do not come in contact 
with water.  

Before cleaning, always unplug the appliance from the power supply and let it 
cool down.  

This appliance is not intended to be operated by means of an external timer or 
separate remote-control system. 

Always place the unit on a flat surface. Ensure, also, not to cover the device 
and not to put anything on it. 

Always remove the plug from the wall socket when the appliance is not in use. 

When using an extension lead always make sure that the entire cable is 
unwound from the reel. Use solely CE approved extension leads. Input power 
must be at least 16A, 250V, 3000W. 

Incorrect operation and improper use can damage the appliance and cause 
injury to the user. 

This device complies with standards relating to this type of product. 

 

(*)

 Competent qualified person

 : after sales department of the producer or 

importer or any person who is qualified, approved and competent to perform this 
kind of repairs. 
 

WARNING FOR PARTICULAR PRODUCTS TO USE IN A BATHROOM

 

 
To provide additional protection, in the electrical circuit supplying the bathroom, a 
residual current device (RCD) with a rated residual current not exceeding 30mA 
operation, is recommended. Consult your installer. 

 

Summary of Contents for TRZ-108











Reviews: