CONE
Make sure the cone holder is in place and secure.
• Select the appropriate cone for the desired use.
• Unscrew and remove the cone clamping screw
located on the axis of the device (2)
• Insert the cone (1) on the shaft (2) in the cone
holder.
• Screw the fixing device (to the left) to secure the
cone.
• Notes : The cone should not be free on its axis if
it is correctly installed.
After use, to remove the cone in place, turn the fastener clockwise out
and remove the cone.
• Clean the elements as described in the paragraph " Cleaning " and replace the
fastener to prevent it from being lost.
USE
1. Place the unit on a flat level, slip surface if possible.
2. Connect the equipment into an outlet properly installed.
3. Place a bowl under the opening of the cone holder to
recover the shredded food.
4. Press the On / Off switch (1) briefly once or twice before
placing food in the feed tube, to ensure that the cone is
properly attached to the drive shaft of the motor.
5. Push on & Hold the On / Off button (1) and put the food to
grate or slice in the tube. (2)
Note : (if necessary) Use the pusher to push food inside.
After use,
6. Release the Start / Stop button to stop the unit.
7. Remove the electric plug from the outlet.
8. Remove the cone as described above.
9. Clean the device and accessories after each use.
Tip : Wash removable parts immediately under the tap,
because once dry fruit pulp or leftover vegetable can be removed less easily.
CLEANING AND MAINTENANCE
11
