TECHWOOD TPP-913 Instruction Manual Download Page 7

 

This apparatus satisfied EC directives, it was controlled according to all the 
European current  directives, like: electromagnetic compatibility (EMC) and low 
tension (LVD). This apparatus was designed and manufactured in respect of the 
last safety regulations and technical specifications. 

 

ENVIRONMENTAL PROTECTION 

(Destruction of batteries) 

 
To remove the battery:  
• Open the battery compartment and retrieve the battery.  
- THE BATTERY MUST BE REMOVED BEFORE THE UNIT IS GIVEN TO 
REBUS.  
- BATTERY CONTAINS NICKEL CADMIUM AND / OR LITHIUM AND / OR  
NICKEL-METAL HYDRIDE, THE BATTERY MUST BE ELIMINATED IN A 
SAFE WAY. 
DO NOT THROW IN A TRASH CAN, BUT GIVE IN CENTRE OF WASTE. 

 

 

Imported by Sotech International  

" LE PERIPOLE "  

33, Avenue du Marechal de Lattre de Tassigny 

94120 Fontenay sous bois 

– France 

Made in P.R.C 

 

 

The symbol " CMIM " is the guarantee of compliance with 
optional harmonized Moroccan Standards, which reflect 
the essential requirements in terms of technical 
specifications.  
These standards are not mandatory but ensuring 
compliance with the essential requirements. 

 

Summary of Contents for TPP-913








Reviews: