3. Adjustment of the height of the support tube.
Open the clip located in the middle of the support tube.
Adjust to the desired height
Close the clip.
IRONING
Place the machine, assembled, on a flat and stable floor.
Adjust the height of the hanger if necessary and hang the garment to be ironed on it.
Note : Make sure there is enough water in the tank and that it is correctly
positioned.
Plug the electrical plug into a grounded outlet
if the product is Class I.
Turn the steam selector switch to the desired position.
Let the machine preheat for about 35 seconds, until
steam comes out of the diffuser.
Caution
By moving the diffuser from side to side of the garment, water vapor may appear on
the handle of the ironing brush. (Risk of burns).
Always iron from the main part of the garment.
1. Hold the hem or the lower part with your hand, gently pull down to flatten the
crumpled part and iron the crumpled parts with the steam diffuser.
2. To do this, Gently press the metal panel of the ironing brush onto the garment,
3. Move the brush up and down so that the steam enters the fibers.
4. After ironing the main part, iron the abutments from top to bottom.
Notes : When ironing the collar, you can fold the entire collar back, hold one end
of the collar by hand, move the ironing brush horizontally.
Always watch out for steam!
5. When ironing the sleeves, pull the sleeves in a
straight line and move the ironing brush along the
sleeves.
6. When ironing the lower part of the garments, hold
one side of the garment (1), and hold the other side
with the extension of the appliance (2).
Move the ironing brush horizontally.
7. After ironing the front of the garment, turn it over to iron the back
Ironing the pants fold
11
