TECHWOOD TCO-6074, Instruction Manual

Page: 8 / 12

PARTICULAR WARNING FOR PRODUCT USE IN A BATHROOM
● Switch off when not in use, even if for a moment.
● when the hairdryer is used in a bathroom, unplug it after use since the proximity
of water presents a hazard even when the hairdryer is switched off.
● • Do not use this product while taking a shower or bath. Always unplug the
device even close between 2 uses.
• When the unit is used in a bathroom unplug it after use since the proximity of
water presents a risk, even when the power is off.
● For additional protection, the installation of a residual current device (RCD)
having a rated residual operating current not exceeding 30 mA is advisable in
the electrical circuit supplying the bathroom. Ask your installer for advice.
NOTE: A thermal fuse, is not a residual current device (RCD).
• Do not use this product while taking a shower or bath.
• Always unplug the unit itself between two closely spaced uses.
• For example: Stop the machine and unplug it if you drop it while you dry.
FIRST USE
Before first use, remove the unit and all accessories carefully.
Clean the outside and inside of the machine cabinet with a damp cloth and wipe
dry.
Location
1. Air concentrator
2. "Direct fresh air" button
3. Temperature selector 1, 2 or 3
4. Fan speed selector 0.1 or 2
5. Cable Protection & Hanging Ring
6. Air
inlet protection grille
(removable)
Make sure that your hands are
completely dry before plugging in.
Plug in and set switch to the required
position
Once your hair is dry set the switch
off and unplug the dryer.
8