9
MOUNTING
Do not use the heater without installing the feet at the bottom of the unit as this
may heat the floor and cause a fire.
Remove the heater from the packaging.
Check that neither the heater nor the power cable has been damaged during
transport.
Return the heater to a carpet or a soft surface.
Install the feet in the correct position as shown in the below draws.
Return the heater to the upright position for use.
CAUTION: Use heater only in normal vertical position, with the feet attached to
the bottom of the unit.
Any other position of the device could create a dangerous situation.
USE
Unroll the power cord completely.
Check that the tension in force in the country where you are, corresponds to that
indicated on the apparatus.
Connect the apparatus in a socket-outlet in good state, and connected to the
ground, to avoid any danger.
Disconnect the power source cable before any operation of cleaning of
maintenance and accessories assembly.
Stand the appliance on a table or flat surface.
Turn the thermostat knob clockwise to the maximum position.
Notes: When the temperature reaches a comfortable level, slowly turn the
thermostat knob counter clockwise until the power light turns off.
