background image

 

 

 

 

the essential requirements into technical 
specifications. These standards are not mandatory 
but are guarantees of compliance with essential 
requirements. 
 
The symbol "GLASS / FORK" means that the device is 
compatible and can come into contact with foodstuffs. 
 
The symbol ROHS (Restriction of use of some 
Hazardous Substances) on the Environmental 
Protection, certifies that for each of the five hazardous 

substances • Lead • Mercury • (hexavalent) chromium • 

products for protection against flames PBB and PBDE, 
the peak concentration is equal to or less than 0.1% of 
the weight of homogeneous material, and 0.01% for the 

6th • cadmium.

 

 
The symbol "HOT WALL" warns the user that the walls 
of the unit can become very hot, and to take 
precautions as required. 
 
The symbol "TRIMAN" indicates that the consumer is 
invited to dispose the product as part of a separate 
collection (eg recycling bin, waste, voluntary intake 
point).   
For more information : http://www.quefairedemesdechets.fr 

 

CLEANING AND MAINTENANCE 

 
Before cleaning, always: switch off the appliance, disconnect 
the apparatus and let it cool.   
Clean the outside of the apparatus with a sponge or slightly wet 
linen. 

 

Summary of Contents for TBQ-801












Reviews: