8
9. After 3 to 5 minutes, sugar filaments will escape from the unit. Use a wooden
wand or plastic cone and turn the cone or wand over the bowl to hang on the
sugar filaments. When the first filaments are hooked, hold the cone in a
horizontal position and continue rotating it between the fingers to increase the
volume of sugar on the support. -
10. Turn off the unit when no more sugar filaments are coming out of the propeller. -
11. Wait until the propellant stops to put on a new dose of sugar and to refill a
cotton candy.
Note : Do not use more than two candies or 10g of sugar at a time. This may clog
the unit and prevent proper operation.
ADVICE
If cotton candy does not form very well and the filaments break, follow these
instructions :
• Put only 1
-2 hard candies at a time.
• Make sure the pieces of candy are evenly placed on each side of the turntable.
Note : For best results, break candies before use.
The machine works well with
candies (with or without sugar) from the below list
• Fruity candies
• Cream sweets
• Caramel
• Pepper mint
• Cinnamon sweets
• Coffee sweets
• Any other candy flavour.
The candies that can damage the device are :
• Ball
-shaped candies
• Candy with a hard shell
• Gummed or chewed candies
• Candy pressed in sugar
• Instant drinks
CLEANING AND MAINTENANCE
Before cleaning, always: switch off the appliance, disconnect the apparatus and
let it cool.
Clean the outside of the apparatus with a sponge or slightly wet linen.
The parts (removable) in contact with food like plate, bowl, forks, Spatula etc. can
be washed in hot water with sponge and soft detergent or put in the dishwasher.
Never plunge the apparatus in water or all other liquid!
Do not use abrasive cleaners, gritting, or metal brush or another cutting object.
1. After cooling, remove the turntable by firmly squeezing both sides and pulling
upward.
2. Unlock the bowl by turning clockwise and lifting.
3. Wash the disassembled parts with warm water, using a clean, slightly damp,
non-abrasive sponge. Rinse and dry.
Note : The unit can be removed easily for easy cleaning.
