7
4. Only connect the machine to a properly installed 230V~ 50Hz safety socket.
(check whether the electrical voltage that you intend to use is the same as that of
the machine. Details are to be found on the label on the base)
5. switch the machine to position
“
ON
”
. The control lamp on the kettle shows
that the water is heating.
6. When boiling the machine switches off automatically.
7. Take the Kettle and pour genteelly the water in a sink. Take care to ovoid
any burn.
Note: Do not press up the lid when pouring.
USING
1. Fill the kettle with fresh water (Do not overfill!)
2. Place the kettle on the connected base.
3. switch the machine to position
“
ON
”
. The control lamp on the kettle shows
that the water is heating.
4. When boiling the machine switches off automatically.
5. Take the Kettle and pour genteelly the water in cups or what ever. Take care
to avoid any burn and Do not press up the lid when pouring.
CLEANING AND MAINTENANCE
Before cleaning, switch off the appliance, always disconnect the apparatus and to
let it cool.
Clean the outside of the apparatus with a sponge or slightly wet linen.
The Inside can be cleaned with sponge to remove limestone deposits. Rinse with
fresh water.
Never plunge the apparatus in water or all other liquid!
Do not use abrasive cleaners, gritting, or metal brush or another cutting object.
The calcium filter can be removed for cleaning.
STORAGE
-Ensure the unit is completely cool and dry.
-Do not wrap the cord around the appliance, as this will cause damage.
-Keep the appliance in a cool, dry place.
