8
Note : The hose is internally covered with to height temperature resistant material.
(about 40° C).
Depending on the chosen use, Vacuum or Blower, connect the hose to the
appropriate connection.
A. Hoover. (1)
B. Blower. (4)
Place the On / Off switch in position "I" to start the appliance.
Place the switch in the "O" position to stop the appliance.
CLEANING AND MAINTENANCE
Before cleaning, always switch off the appliance, disconnect the apparatus and let
it cool.
Clean the outside of the apparatus with a sponge or slightly wet linen. (possibly
with household product).
Never immerse the motor unit and the cover in water or any other liquid !
Do not use abrasive cleaners, gritting, or metal brush or another cutting object.
Notes: Do not wash the filter in a washing machine or dry it with an hair dryer.
Do not clean the exterior of the vacuum cleaner with gasoline oil or any
other liquid.
The metal tank can be washed with water and a household neutral
product. Rinse and allow to dry before re-use.
After cleaning, stop the ash vacuum cleaner and tighten the tube suction
and pipe vertically, to allow the remaining ash, into the hose, falling into
the container.
If the suction power deteriorates during use, stop the ash vacuum cleaner, open
the container and empty it in a bin or suitable packaging before disposing of the
unit.
Filter cleaning
Disconnect the suction hose. Detach the
cover (engine block) from the tank and
turn it over on the tank or on the ground.
Hold the dust filter and loosen the
locking wing nut (A) to disengage the
filter.
