Operation:
Viewing Modes:
The live view area displays the live video stream from the cameras, each camera will display
its own section of the quad view or can be viewed individually. There are 4 viewing modes
That can be displayed as shown below:
Quad View:
This splits the screen’s image area into 4 quadrants and displays the active
camera in each quadrant. Press the center of the individual quadrant to enter single
viewing mode.
Single View:
This mode displays one camera at a time on full screen. Press the
button to change between the channels. Tap the center of the image to return to
quad viewing mode
Scan Mode:
The monitor’s screen and speakers will remain off until a camera detects
motion. The camera will then display at full screen (sound and video on) until there
has been no motion for 15 seconds. After that, the monitor screen will turn off again.
Press and release the power/scan button to turn scan mode on.
Auto Sequence:
Displays each channel automatically in sequence in full screen
display. The system defaults to auto sequence mode when scan mode is turned off.
Press the SEQ button to turn auto sequence mode off and return to quad viewing
mode.
