LA5597 IR Transmitter Operation Manual
- 6 -
5.0- How to enter to Test mode
You can test the two IR signals which you had learnt into
the transmitter. Test mode last out 15 seconds.
i.
Pressing TEST button for 3 seconds, the led flashing
orange indicates enter to test mode.
ii.
Pressing the TEST button once the IR transmitter transmits the A IR signal.
iii.
Going on to press once the test button, IR transmitter transmits the B IR signal.
IR A signal and IR B signal transmit alternately through pressing test button.
6.0- How to clear the all record signal
i.
Power off the IR transmitter.
ii.
Press the LEARN button and power up the
transmitter.
iii.
After 5 seconds, the green LED flashing two times indicates all the record signal had
been cleared.
Section 2 – Troubleshooting Guide
Wireless IR Transmitter
Symptoms
Possible causes and cures
IR Transmitter can’t learn IR signal from
remote control.
Ensure the IR led of remote control front to front the IR
receiver of the IR transmitter.
IR Transmitter can not control the IR
device after learning IR signal.
Ensure the position of IR device (TV, Air condition etc)
would not beyond control distance of IR transmitter (10
meters).
IR Transmitter can not control the IR
device after learning IR signal.
Ensure there is no covering in front of the IR receiver of IR
device(TV, Air condition etc)
Press
LEARN
button for 5 seconds
Green
LED flash
two times
Press
TEST
button
for 3 seconds
Orange
LED flash
