3
3.
Termination and Wiring
Refer the connection diagram for the electrical connection. Appropriate mains voltage should be connected to
the terminals of the instruments as specified. The connectors are suitable for 1.5 sq.mm cable cross section.
VFSL Integral (Supply – 85 to 265 VAC)
VFSL Two Part (Supply – 110 or 230 VAC)
Fig 2
+15VDC
GND
SIGNAL
+
15VDC
GND
SIGNAL
230 VAC
Supply
FSS
OND
OFFD/CAL
ON
Supply
85 to 265 VAC
Potential Free Relay Contacts x 2 SPDT
Fig 1
VFSL Integral (Supply – 24VDC)
Controller VFSL Two Part Integral (Supply – 24VDC)
Push Switch
Foe FSL/FSH
Selection
Fork Probe
Enclosure
Controller VFSL Two Part
Supply – 110 or 230 VAC
