22
User Class / Level
User Class (Manager or User) and security level (Personal level from 1 to 5, or system level) can be re-
assigned.
Duress
Select a hand (vascular data) to be used for duress verification. This function is available only when two
hands are enrolled for one User. If a User is verified with the selected hand, it is regarded as duress
verification, the door or gate will open but an alert alarm will also occur automatically. Please refer to
“Chapter 2 4.6 Verification With Duress Code” for details on duress verification.
The User must use unselected hand for normal verification to gain access.
Validity
This is to deactivate a User without deleting the data from the system. Deactivated Users will not be
allowed to gain access although the User data will still remain in the system database. It can be re-
activated using this menu without re-enrolling.
Start & Expire Time
If you set a Start time, the User will not be allowed to gain access until the set time comes. By default,
every User is immediately allowed to use the system right from the time of enrollment unless the Start
time is specified.
In the same manner, if the Expired Time is set, once expired, the User cannot access the system even
though the User data still exists in the database.
Password
This is used to assign a password for a selected User. Once a password is given, the User can gain
access only by entering the password along with a PIN or card. Hand vascular pattern verification is not
required for the password User. Please refer to “Chapter 2 4.2 Password User Verification“ for details on
password User verification.
5.2 Template Management (Add/Update Vascular Data)
5.2.1 Vascular Update
The vascular data of an enrolled User can be updated without changing User information in the
NetControl-X database. This allows for re-enrolling and updating the vascular data only for an existing
User that is experiencing difficulty in verifying his/her hand due to improper enrollment and/or lack of
training.
