Quick Operation Guide of Network Video Recorder
13
3.
Connect
pluggable block
back into terminal block.
Controller Connection
To connect a controller to the NVR:
1.
Disconnect pluggable block from the KB terminal block.
2.
Unfasten stop screws from the KB D+, D-
pluggable block
, insert signal cables into slots and fasten stop
screws. Ensure signal cables are in tight.
3.
Connect Ta on controller to D+ on terminal block and Tb on controller to D- on terminal block. Fasten stop
screws.
4.
Connect
pluggable block
back into terminal block.
Make sure both the controller and NVR are grounded.
